Pipeline Plugs / Stoppers
Pipeline Plugs / Stoppers
-
iNPIPE PRODUCTS’™ isolation tool
used when a new flange must be welded to existing pipe work which has been c... -
iNPIPE PRODUCTS™ High Pressure Pipe Plug (HP Pipe Plug)
used when a weld or joint needs hydrotesting but no end flanges are available. -
iNPIPE PRODUCTS™ Low Pressure Pipe Plugs (LP Pipe Plugs)
designed for the temporary sealing-off of pipeline, drains, sewers and ves... -
Canvas Air Bag (1"-15")
designed to go through restricted openings
-
Canvas Air Bag (16"-96")
designed to go through restricted openings -
Centre Outlet Nylon Air Bags
Centre Outlet Nylon Air Bags -
Completion Plugs & O-rings
Completion Plugs & O-rings -
Continental bags based on GIS/E4 design
covering a wide size range and pressures
-
Drain Plug
sizes 100mm (4") to 600mm (24") -
Eesiseel (2"-12")
designed for use where there is access to the full pipe bore -
Eesiseel with through hole(4")
for pressure testing -
Flowstop GIS/E4 Self Centering Stopper
Self‐Centring Stopper tested and approved to GIS/E4 specification.
-
Flowstop Limited
Flowstopping bags and plugs -
iNPIPE PRODUCTS™ Medium Pressure Pipe Plug (MP Pipe Plug)
used when a weld or joint needs hydrotesting but no end flanges are available -
International Pipeline Products (In-Pipe) Pipeline Plugs / Stoppers
Pigging, pipeline pigging and pigging components. -
Iris Stop Secondary Bag GIS/E20
pressures up to 30PSI
